Acer Veriton 5200 Bedienungsanleitung PDF herunterladen (Seite 81)

FAQs

Acer is dedicated in bringing you a reliable and easy to maintain

computer. However, we realize that some problems may arise

unexpectedly. Below are possible questions that may arise during the

use of your computer with corresponding easy troubleshooting

solutions to the situation.

Q: I pressed the power button on but the system did not boot up.

A: Check the power indicator.

If the indicator is not lit, no power is being applied to the system. Do

the following:

• Check if you plugged the power cable properly into an electrical

outlet.

• Check if the main power switch located on the rear panel of the

computer is turned on.

• Check if the voltage selector switch located on the rear panel of

the computer is set to the correct voltage.

• If you are using a power strip or AVR, make sure that it is plugged

in and turned on.

If the indicator is lit, check the following:

• Is a nonbootable (nonsystem) diskette in the floppy drive? If yes,

remove or replace it with a system diskette and press Ctrl + Alt +

Del to restart your computer.

• The operating system files may be damaged or missing. Insert the

startup disk you created during Windows setup into the floppy

drive and press Ctrl + Alt + Del to restart your computer. This will

automatically diagnose your system and make necessary fixes.

However, if the diagnostic utility still reports a problem, then you

may have to perform the recovery process to restore your system

to its original default factory settings.

Caution! Using the Recovery CD will erase all files previously

saved in your computer so make sure to back up your important

files before starting the recovery process. Refer to your Veriton

5200 online guide for instructions on the recovery process.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86

Keine Kommentare

Acer Veriton 5200 Bedienungsanleitung Seite 81