Acer Aspire X1300 Technical Information PDF herunterladen (Seite 28)

20 Chapter 2

Integrated Peripherals

Parameter Description Option

IDE Function Setup Press Enter to access the IDE Function Setup submenu.

MCP Storage Config Press Enter to access the MCP Storage Config submenu.

Init Display First Select whether to boot the system using the AGP graphic card or a PCI

card installed on the PCI Express slot or PCI slot.

PCIEx

PCI Slot

Onboard

HD Audio Enables or disables the onboard audio controller. Auto

Disabled

HDMI Audio Allows you to control the audio function of the onboard HDMI. Disabled

Auto

MAC LAN Enables or disables the built-in network interface card. Auto

Disabled

IDE HDD Block Mode When enabled, the BIOS will automatically detect if your hard disk

supports block transfers and set the proper block transfer settings for it.

Depending on the IDE controller, up to 64 KB of data can be transferred

per interrupt when block transfers are enabled.

When disabled, only 512 bytes of data can be transferred per interrupt.

Enabled

Disabled

Onboard Serial Port 1 Select the I/O address and IRQ for the first serial port. 3F8/IRQ4

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

Auto

Disabled

Onboard Parallel Port Select the I/O address and IRQ for the onboard parallel port. 378/IRQ7

278/IRQ5

3BC/IRQ7

Disabled

Parallel Port Mode Select an operating mode for the onboard parallel port. SPP

EPP

ECP

ECP+EPP

ECPM Mode Use DMA Select DMA channel for the LPT port in ECP mode. This parameter can

be configured if the parallel port mode is set to ECP or ECP +EPP

mode.

USB Device Setting Press Enter to access the USB Device Setting submenu.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 99 100

Keine Kommentare

Acer Aspire X1300 Technical Information Seite 28