Acer Altos R700 Series Bedienungsanleitung PDF herunterladen (Seite 30)

1 Description

• Platform event pages -- the BMC dials a paging service and

sends a predefined paging string. To use platform event paging

(PEP), you must attach an external modem to the emergency

management port (Serial 2).

• BMC LAN alerts -- the BMC sends an alert to a predefined

destination on the LAN.

You can configure PEP and BMC LAN alerts by using the System Setup

Utility (see “Alerting for Platform Events” on page 68).

Emergency Management Port

The emergency management port (EMP) refers to the use of the Serial

2 port, with either an external modem or direct serial connection, for

remote management. The BMC controls the port and interfaces with

remote access software, such as the Direct Platform Control application

in Acer Advance Server Management.

You can configure the EMP by using the System Setup Utility (SSU) or

the System Configuration Wizard (SCW).

EMP and Serial Over LAN

The RJ-45 Serial 2 port on the back panel can be configured in several

different ways: as a standard serial port, as an Emergency

Management Port, or for serial output redirection over a LAN. You can

configure these settings using either the SSU or the SCW.

Note:

Important Altos R700 Server Chassis considerations: If you

have configured the Serial 2 port for use as an Emergency

Management Port and “always available”, the Serial 2 port will be

accessible only by remote server management software. The

operating system will never be able to access the port.

If you have configured the Serial 2 port for Serial Over LAN, the

port’s functionality will only be impacted when there is an active

Serial Over LAN session from a remote console. At all other times

either the operating system or EMP will control the port,

depending on your configuration.

BS811.f/cppl!!Qbhf!31!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 134 135

Keine Kommentare

Acer Altos R700 Series Bedienungsanleitung Seite 30