Acer Altos R700 Series Bedienungsanleitung PDF herunterladen (Seite 33)

• Must enter the user password to exit secure mode.

If only the supervisor password is set, you:

• Must enter the supervisor password to enter BIOS Setup or the

SSU.

• Must enter the supervisor password to boot the server if Password

on Boot is enabled in either the BIOS Setup or SSU.

• Must enter the supervisor password to exit secure mode.

If both passwords are set, you:

• May enter the user password to enter BIOS Setup or the SSU.

However, you will not be able to change many of the options.

• Must enter the supervisor password if you want to enter BIOS

Setup or the SSU and have access to all of the options.

• May enter either password to boot the server if Password on Boot

is enabled in either the BIOS Setup or SSU.

• May enter either password to exit secure mode.

Secure Mode

Configure and enable the secure boot mode by using the SSU. When

secure mode is in effect:

• You can boot the server and the operating system will run, but you

must enter the user password to use the keyboard or mouse.

• You cannot turn off system power or reset the server from the

front panel switches.

Secure mode has no effect on functions enabled via remote server

management or power control via the watchdog timer.

Taking the server out of secure mode does not change the state of

system power. That is, if you press and release the power switch while

secure mode is in effect, the system will not be powered off when

secure mode is later removed. However, if the front panel power

switch remains depressed when secure mode is removed, the server

will be powered off.

BS811.f/cppl!!Qbhf!34!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 134 135

Keine Kommentare

Acer Altos R700 Series Bedienungsanleitung Seite 33