Acer Altos R700 Series Bedienungsanleitung PDF herunterladen (Seite 62)

4 Configuration Software and Utilities

BIOS Setup

You can run BIOS Setup with or without an operating system being

present. BIOS Setup stores most of the configuration values in battery-

backed CMOS; the rest of the values are stored in flash memory. The

values take effect when the system is booted. POST uses these values to

configure the hardware. If the values and the actual hardware do not

agree, POST generates an error message.

Record BIOS Setup Settings

Record your BIOS Setup settings. If default values ever need restoring

(after a CMOS clear, for example), you must run BIOS Setup again. Your

record will make this much easier.

If BIOS Setup Is Inaccessible

If you have a misconfigured diskette drive, and you cannot use BIOS

Setup to correct the problem, you might need to clear CMOS memory.

To clear CMOS, either of two methods can be used.

1 Press the reset button and hold it down for four seconds or more,

and then, while holding the reset button down, press the power

button. Release both buttons at the same time.

2 Move the Clear CMOS jumper found on the configuration jumper

block on the baseboard.

Temporarily Changing the Boot Device Priority

During POST, you can change the boot device priority for the current

boot process. The changes are not saved for the next boot process.

1 Boot the server.

2 At any time during POST, press <Esc>. When POST completes, a

popup Boot menu displays.

3 Use the arrow keys to highlight the device you want the server

system to boot from first. For example, if you want the server

system to boot from the CD-ROM first, you select “ATAPI CD-ROM

Drive.”

Note: One of the selections on the popup Boot menu is “Enter

Setup.” Selecting this option brings you into the BIOS Setup.

BS811.f/cppl!!Qbhf!63!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 134 135

Keine Kommentare

Acer Altos R700 Series Bedienungsanleitung Seite 62