Acer Altos R700 Series Bedienungsanleitung PDF herunterladen (Seite 80)

4 Configuration Software and Utilities

3 In the PEM window, click Configure LAN and fill in the boxes

described in the following steps (boxes that aren’t listed here are

not required for LAN alerts).

4 Select the Enable LAN Alerts check box.

5 (Optional) In the SNMP Community String box, enter a string for

the community field in the Header section of the SNMP trap sent

for an alert. The string must be from 5 to 16 characters.

The default string is public.

6 In the IP Setup box, choose either:

• DHCP: the IP address for the server is automatically assigned

by the DHCP (dynamic host control protocol) server on the

network. The Host, Gateway, and Subnet Mask boxes in the

dialog are ignored.

• Static: assign the IP address for the server using the Host,

Gateway, and Subnet Mask boxes in the dialog.

7 If you chose Static IP Setup in the previous step, fill in the IP

addressing boxes:

• Host IP Address: the IP address of this server.

• Gateway IP Address: the IP address of the router for this

server.

• Subnet Mask: the IP address for the server’s subnet. The server

uses this to decide if the alert destination is on the same

subnet.

8 In the Alert IP Address box, fill in the IP address of the system you

want to receive alerts from this server. If you want the alert to be

broadcast to an entire subnet, enter the IP address for the subnet.

9 From the Options menu, choose Configure Event Actions.

10 In the BMC LAN Alerting Actions window, move the events that

you want to generate an alert to the Enabled column and move all

other events to the disabled column using the following buttons:

• >>: Moves all events from the enabled list to the disabled list.

• >: Moves the selected event from the enabled list to the

disabled list.

• <: Moves the selected event from the disabled list to enabled

the list.

• <<: Moves all events from the disabled list to the enabled list.

BS811.f/cppl!!Qbhf!81!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 134 135

Keine Kommentare

Acer Altos R700 Series Bedienungsanleitung Seite 80