Acer Altos R700 Series Bedienungsanleitung PDF herunterladen (Seite 81)

11 Click Save to save the changes.

12 Click Close to return to the BMC LAN Configuration window.

13 To send a test alert to verify that you have correctly configured

BMC LAN alerts, from the Options menu, choose Send Alert.

14 Click Save to save the changes.

15 Click Close to return to the PEM window.

Managing the Server Remotely

You can set up the server so that you can connect to it from a remote

client system to perform management tasks. You can make the

connection over a LAN or by using a modem or direct serial cable to

the Emergency Management Port (EMP). Instructions for setting up the

server for remote LAN and serial/modem access are given below.

Setting Up Remote LAN Access

To configure remote LAN access:

1 From the SSU Main window, choose Platform Event Manager

(PEM).

2 In the PEM window, click Configure LAN and fill in the boxes

described in the following steps (boxes that aren’t listed here are

not required for remote access).

3 To require a password for remote access, enter the password in the

Enter New Password box and in the Verify New Password box.

Passwords can be from 1 to 16 characters long, using any ASCII

character in the range [32-126]. To clear the passwords, leave both

boxes blank. (You can also clear the password by choose the menu

Options > Clear LAN Password.)

4 From the LAN Access Mode list, select the remote access mode:

• Full Access: a remote system can initiate a LAN connection

regardless of the state or health of the server.

• Restricted: a remote system can initiate a LAN connection,

but cannot perform control operations such as power down,

reset, or front panel NMI.

• Disabled: remote systems are not allowed to initiate LAN

connections.

5 In the IP Setup box, choose either:

BS811.f/cppl!!Qbhf!82!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 134 135

Keine Kommentare

Acer Altos R700 Series Bedienungsanleitung Seite 81