Acer AT350 F1 Bedienungsanleitung PDF herunterladen (Seite 120)

5 System troubleshooting

108

Initial troubleshooting checklist

Use the checklist below to eliminate possible causes for the problem

you are encountering.

• AC power is available at the wall outlet?

• Is the power supply module properly installed?

• Is the system power cord properly plugged into the power supply

module socket? and connected to a NEMA 5-15R outlet for

100-120 V or a NEMA 6-15R outlet for 200-240 V?

• Are all peripheral cables correctly connected and secured?

• Did you press the system power button to turn the server on

(power on indicator should be lit green)?

• Are all device drivers properly installed?

• Are hard disk drive(s) properly formatted and configured?

• Are the BIOS configuration settings in the BIOS Setup Utility

correct?

• Is the operating system properly loaded?

Refer to the operating system documentation.

• Are all hardware components compliant with the tested

components lists?

• Are all internal cables correctly connected and secured?

• Is the processor properly seated in its mainboard socket?

• Are all standoffs in the proper location and not touching any

components, causing a potential short?

• Are all add-in expansion cards fully seated in their mainboard

slots?

• Are all system jumpers correctly set?

• Are all switch settings on add-in boards and peripheral devices

correct?

To check these settings, refer to the manufacturer’s

documentation that comes with them. If applicable, ensure that

there are no conflicts (e.g., two add-in boards sharing the same

interrupt).

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 183 184

Keine Kommentare

Acer AT350 F1 Bedienungsanleitung Seite 120