Acer AT350 F1 Bedienungsanleitung PDF herunterladen (Seite 34)

2 System setup

Power-on problems

If the system fails to boot after you have applied power, check the

following factors that might have caused the boot failure.

• The external power cord may be loosely connected.

Check the power cord connection from the power outlet to the

power cord socket on the rear panel. Make sure that the cord is

properly connected to the power outlet and to the power cord

socket.

• No power comes from the grounded power outlet.

Have an electrician check your power outlet.

• Loose or improperly connected internal power cables.

Check the internal cable connections. If you are not confident to

perform this step, ask a qualified technician to assist you.

Warning! Make sure all power cords are disconnected from the

electrical outlet before performing this task.

Note: If you have gone through the preceding actions and the

system still fails to boot, ask your dealer or a qualified technician

for assistance.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 183 184

Keine Kommentare

Acer AT350 F1 Bedienungsanleitung Seite 34