Acer AT350 F1 Bedienungsanleitung PDF herunterladen (Seite 64)

3 System upgrades

keyed in such a way that you cannot install the processor in

the wrong orientation without bending the pins.

(2) Hold the processor by its edges then insert it in the socket.

(3) Close the retention plate.

(4) Engage the load lever back in place and secure the load lever

under the load lever retention tab .

8 Apply the thermal interface material.

(a) Use an alcohol pad to wipe off the old thermal grease from

both the HSF assembly and the processor socket retention

plate.

(b) Apply a thin layer of thermal interface material before

installing the HSF.

Make sure that only a very thin layer is applied so that both

contact surfaces are still visible.

9 Install the heatsink fan assembly (see "Installing the heatsink and

fan assembly" on page 48).

10 Observe the post-installation instructions described on page 27.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 183 184

Keine Kommentare

Acer AT350 F1 Bedienungsanleitung Seite 64