Acer AT350 F1 Bedienungsanleitung PDF herunterladen (Seite 74)

3 System upgrades

Installing a memory module

Warning! Memory of the identical size, speed, and organization

must be installed in the same colored DIMM slots.

1 Observe the pre-installation instructions on page 26.

2 Remove the side panel described on page 28.

3 Lay the server on its side (components showing).

4 Locate the DIMM slot on the mainboard.

5 Install the memory module.

(a) Align then insert the DIMM into the socket (1).

(b) Push the DIMM to the socket until the retaining clips snap

inward (2).

Note: The DIMM slot is slotted to ensure proper installation. If you

insert a DIMM but it does not fit easily into the socket, you may

have inserted it incorrectly. Reverse the orientation of the DIMM

and insert it again.

6 Observe the post-installation instructions described on page 27.

The system automatically detects the amount of memory installed.

Run the BIOS setup to view the new value for total system memory

and make a note of it.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 183 184

Keine Kommentare

Acer AT350 F1 Bedienungsanleitung Seite 74