Acer AT350 F1 Bedienungsanleitung PDF herunterladen (Seite 80)

4 System BIOS

BIOS overview

BIOS setup is a hardware configuration program built into the system's

Basic Input/Output System (BIOS). Since most systems are already

properly configured and optimized, there is no need to run this utility.

You will need to run this utility under the following conditions.

• When changing the system configuration settings.

• When redefining the communication ports to prevent any

conflicts.

• When modifying the power management configuration.

• When changing the password or making other changes to the

security setup.

• When a configuration error is detected by the system and you are

prompted ("Run Setup" message) to make changes to the BIOS

setup.

Note: If you repeatedly receive Run Setup messages, the battery

may be bad. In this case, the system cannot retain configuration

values in CMOS. Ask a qualified technician for assistance.

BIOS setup loads the configuration values in a battery-backed

nonvolatile memory called CMOS RAM. This memory area is not part of

the system RAM, which allows configuration data to be retained when

power is turned off.

Before you run the AMI BIOS Setup Utility, make sure that you have

saved all open files. The system reboots immediately after you close the

Setup.

Note: AMI BIOS Setup Utility will be simply referred to as "Setup"

"Setup Utility" in this guide.

The screenshots used in this guide display default system values.

These values may not be the same those found in your system.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 183 184

Keine Kommentare

Acer AT350 F1 Bedienungsanleitung Seite 80