Acer AW2000h-AW170h Bedienungsanleitung PDF herunterladen (Seite 34)

2 System setup

Turning on the system

After making sure that you have properly set up the system and

connected all the required cables, you can now power on the system.

To power on the system:

After plugging in the power cord, press the power button for each

node. Each node can be powered on or powered off independently.

You can turn on each node at any sequence.

The system starts up and displays a welcome message on the monitor.

After that, a series of POST messages appears. The POST messages

indicate if the system is running well or not.

Note: If the system does not turn on or boot after pressing the

power button(s), go to the next section for the possible causes of

the boot failure.

Aside from the POST messages, you can determine if the system is in

good condition by checking if the following occurred.

• The power indicator on the front panel lights up green.

• The Num Lock, Caps Lock, and Scroll Lock indicators on the

keyboard light up.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 159 160

Keine Kommentare

Acer AW2000h-AW170h Bedienungsanleitung Seite 34