Acer AW2000h-AW170h Bedienungsanleitung PDF herunterladen (Seite 42)

3 System upgrades

Configuring the storage devices

The system supports up to twelve 3.5-inch hot-plug SATA hard disk

drives. An optional floppy drive or optical drive can also be added to

the server.

Accessing the drive bays

Since SATA drives have hot-plug capability, you do not need to access

the inside of the chassis or power down the system to install or replace

SATA drives. Proceed to the next step for instructions.

Note: The operating system you use must have RAID support to

enable the hot-plug capability of the SATA drives.

Caution! When working around the SATA backplane, do not

touch the backplane with any metal objects and make sure no

cables touch the backplane. Also, regardless of how many SATA

drives are installed, all eight drive carriers must remain in the

chassis to maintain proper airflow.

Hard disk drive configuration guidelines

Observe these guidelines when replacing or installing a hard disk drive.

• Use only qualified SATA HDDs. To purchase a SATA HDD, contact

your local representative.

• Before removing a hard disk drive, make sure to back up all

important system files.

• Check hard disk drive status by checking the status LED indicators

on the HDD carrier.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 159 160

Keine Kommentare

Acer AW2000h-AW170h Bedienungsanleitung Seite 42