Acer TravelMate P255-MP Bedienungsanleitung PDF herunterladen (Seite 69)

Video and audio connectors - 69

VIDEO AND AUDIO CONNECTORS

Connect to a monitor with a VGA or DVI port (the type of connection

supported depends on your computer’s configuration). The

appropriate cable is usually included with the monitor.

Follow these steps to connect an monitor to your computer:

1. Check that the computer is powered off and the monitor power

switch is turned off.

2. Attach the video cable to the monitor port on the computer. Secure

the cable connection with the screws provided.

3. Connect the monitor power cable and plug it into a properly

grounded wall outlet.

4. Follow any setup instructions in the monitor's user's guide.

5. Turn on power to the monitor, then the computer.

6. Make sure that the current resolution and refresh rate do not exceed

the specifications of the monitor. If necessary change the display

settings used by the computer.

Headphones and microphone

These ports allow you to connect audio devices. Use the headphone

port to plug in stereo headphones or powered speakers. Plugging an

audio device to the headphone port disables the built-in speakers.

Use the microphone port to connect an external microphone for mono

recording; plugging in an external microphone disables the built-in

microphone.

Note

To access the display controls, press the Windows key ( ) + W, type

"Display" and then click on Display.

Note

Some computers have a single "combo" port that allows you to use single-pin

headsets with a built-in microphone. These headsets are most commonly

used with smartphones.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 96 97

Keine Kommentare

Acer TravelMate P255-MP Bedienungsanleitung Seite 69