Acer FAX/Voice/Data Modem Bedienungsanleitung PDF herunterladen (Seite 4)

COM 1, IRQ 4

'MODEM VOICE'

Sierra 3230 (Voice)

DMA 3, IRQ 10

2.4 Software Installation/Configuration

You are now ready to install and configure the commu-

nication software. Refer to your software manual for instal-

lation procedures. Your software must be configured to

communicate with the modem on the same COM port and

IRQ line used by the modem.

We suggest the following communication parameters

when you first use your data communication software.

Consult the software manual for information on using these

and other parameters/features.

38,400 bps; 8 data bits; no parity; 1 stop bit; RTS/

CTS flow control set to “on;” initialization string:

AT&F

The commands used by the modem are compatible

with the command set used by the “Hayes V-series Ultra

Smartmodem 14400” modems, select this modem type in

your data communications software. Select a “Generic Class

2” modem type in your FAX software and select a “Sierra”

modem type in your voice software.

2.5 Using Fax, Voice, and Speakerphone

Capabilities of the Modem

Your modem has built-in advanced FAX, Voice, and

Full Duplex Speakerphone functions. These functions are

accessed through software. Please consult your FAX/Voice/

Speakerphone software manual about procedures on using

these functions. Note that the modem's FAX/Voice/Speaker-

phone commands are used by the software to implement

these functions and are not designed to be used as stand-

alone AT commands.

Voice functions include recording and playback of

voice prompts (files). You may record or playback voice with

your modem by attaching a telephone to the RJ-11 jack

marked "PHONE" or by attaching a microphone to the MIC

jack located on the back of the modem bracket. Then follow

instructions in the FAX/Voice/Speakerphone software on

recording and playback of voice prompts.

1 2 3 4 5 6 7 8 9 ... 19 20

Keine Kommentare

Acer FAX/Voice/Data Modem Bedienungsanleitung Seite 4