Acer DynaVivid Graphics Dock Technical Information PDF herunterladen (Seite 49)

Chapter 3 39

Machine Disassembly and Replacement

This chapter contains step-by-step procedures on how to disassemble the notebook computer for

maintenance and troubleshooting.

Disassembly Requirements

To disassemble the computer, you need the following tools:

• Wrist grounding strap and conductive mat for preventing electrostatic discharge

• Flat screwdriver

• Philips screwdriver

• Plastic flat screwdriver

• Plastic tweezers

NOTE: The screws for the different components vary in size. During the disassembly process, group the

screws with the corresponding components to avoid mismatch when putting back the components.

Related Information

The product previews seen in the disassembly procedures may not represent the final product color or

configuration.

IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and

replacement of components, ensure all available cable channels and clips are used and that the cables are

replaced in the same position.

Replacement Requirements

NOTE: Cabling and components require adhesive to be applied during the replacement and reassembly

process.

NOTE: During manufacture a cyanoacrylate glue is used provided by Holdtite Adhesives LTD. This is not a

specified requirement. The reassembler is free to select an alternative appropriate adhesive.

General Information

Pre-disassembly Instructions

Before proceeding with the disassembly procedure, make sure that you do the following:

1. Turn off the power to the system and all peripherals.

Chapter 3

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 183 184

Keine Kommentare

Acer DynaVivid Graphics Dock Technical Information Seite 49