Acer N300 Betriebsanweisung PDF herunterladen (Seite 32)

3 Using expansion features

Using an USB thumb drive

3 Push the card into the slot using your finger until you feel the card lock and hear an

audible system sound. This indicates that the card is properly seated within the slot.

Removing an SD/MMC

card

1 Hold your handheld securely.

2 Release the card from the slot by using your thumb to push against the top of the

card, as if you were pushing it further into the slot (a). An audible system sound and a

click will signal that the card has been released.

3 Gently remove the card from the slot (b).

Using an USB thumb drive

Your Acer n300 supports USB host expansion. Via cradle or sync cable, you can access a

USB thumb drive directly from your n300.

Inserting an USB thumb drive - Through the Cradle

1 Connect the AC adapter cord to the DC-in jack at the back of the cradle.

2 Plug the AC adapter into any AC current outlet.

3 Insert the USB thumb drive into USB host port of Cradle.

Inserting an USB thumb drive - Through the 3-in-1 Sync

cable (optional accessory)

1 Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.

2 Plug the AC adapter into any AC current outlet.

3 Insert the USB thumb drive into USB host port of sync cable.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Keine Kommentare

Acer N300 Betriebsanweisung Seite 32