Acer IEEE 802.11b Wireless USB Adapter Bedienungsanleitung PDF herunterladen (Seite 29)

3.3.1 Setting

• Operating Mode:

If you want to connect to an Access Point, please set the mode

as ”Infrastructure”. If you have more stations and just want to set

them as a local network, please set the Mode as ” Ad Hoc”.

• Channel:

It shows the radio channel number that is used for networking.

The Channel number must be the same among stations, so that

computers can communicate within the local LAN. It can be

changed only under the Ad Hoc Mode. If the Mode is

Infrastructure, this parameter will not be active.

• SSID:

SSID is the group name shared by every member of your wireless

network .You will only be able to connect with an Access Point

(AP), which has the same SSID. Please note that the SSID will be

case sensitive. Please note that when you are in the Ad-hoc

mode, the SSID must be the same among stations so that

computers can communicate within the local LAN properly.

• Tx Rate:

The USB Adapter supports 4 transmission rates: 1Mbps, 2Mbps,

5.5Mbps, and 11Mbps. You may set the TX rate manually, or

select the “Fully Auto” mode to let it run at the most proper rate

automatically.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 69 70

Keine Kommentare

Acer IEEE 802.11b Wireless USB Adapter Bedienungsanleitung Seite 29