Acer Network Device Altos R520 Bedienungsanleitung PDF herunterladen (Seite 101)

BIOS setup

BIOS setup is a hardware configuration program built into the system's

Basic Input/Output System (BIOS). Since most systems are already

properly configured and optimized, there is no need to run this utility.

The BIOS setup utility stores basic settings for your server. You will need

to run this utility under the following conditions:

• When changing the system configuration

• When a configuration error is detected by the system and you are

prompted ("Run Setup" message) to make changes to the BIOS

setup

Note: If you repeatedly receive Run Setup messages, the battery

may be bad. In this case, the system cannot retain configuration

values in CMOS. Ask a qualified technician for assistance.

• When redefining the communication ports to prevent any conflicts

• When changing the password or making other changes to the

security settings

BIOS setup loads the configuration values in a battery-backed

nonvolatile memory called CMOS RAM. This memory area is not part of

the system RAM which allows configuration data to be retained when

power is turned off.

Before you run BIOS setup, make sure that you have saved all open

files. The system reboots immediately after you close the setup.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 183 184

Keine Kommentare

Acer Network Device Altos R520 Bedienungsanleitung Seite 101