Acer Network Device Altos R520 Bedienungsanleitung Seite 152

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 184
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 151
5 Troubleshooting
142
Diagnostic POST code LEDs
During the system boot process, BIOS executes a number of platform
configuration processes, each of which is assigned a specific hex code
number. As each configuration routine is started, BIOS will display the
given POST code to the diagnostic POST code LEDs found on the rear of
the mainboard. To assist in troubleshooting a system hang during the
POST process, the diagnostic LEDs can be used to identify the last POST
process to be executed.
Each POST code will be represented by a combination of colors from
the four LEDs. The LEDs are capable of displaying three colors: green,
red, and amber. Each bit in the upper nibble is represented by a red
LED and each bit in the lower nibble is represented by a green LED. If
both bits are set in the upper and lower nibbles then both red and
green LEDs are lit, resulting in an amber color. If both bits are clear,
then the LED is off.
Diagnostic LED placement diagram
The following table lists the possible POST codes that may be displayed
on the Diagnostic POST code LEDs during system initialization.
Checkpoint
code
Diagnostic LED Decoder
Description
G=Green, R=Red, A=Amber
MSB LSB
Host Processor
0x10h OFF OFF OFF R Power-on initialization of the host
processor (bootstrap processor)
0x11h OFF OFF OFF A Host processor cache initialization
(including AP)
0x12h OFF OFF G R Starting application processor
initialization
LSB MSB
Back edge of server board
USB Port
USB Port
Diagnostic LEDs
Seitenansicht 151
1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 183 184

Kommentare zu diesen Handbüchern

Keine Kommentare