Acer Network Device Altos R520 Bedienungsanleitung PDF herunterladen (Seite 177)

167

Configuring the integrated SAS SW

RAID

This section briefly shows how to create RAID 1 (mirror) volume with

integrated SAS SW RAID function.

Load BIOS default setting

1 Power on the server to start the system POST (Power On Self Test)

process. During boot up, press F2 to enter the BIOS setup screen.

2Press F9 to load BIOS default setting and press F10 save the

configuration changes and exit setup.

Enable integrated SAS SW RAID function

1 In the BIOS Setup Utility, move cursor to Advanced. Then select

Mass Storage Controller and press Enter.

2 Move cursor to Configure SAS as SW RAID and press Enter to

change the Options to Enabled.

3Press F10 save the configuration changes and exit setup.

Enter the integrated SAS SW RAID Configuration Utility

When you see the Intel Embedded Server RAID Technology II

information shows on the screen during the POST (Power-On Self Test),

press Ctrl+E to enter the Embedded RAID II Configuration Utility.

Loading integrated SAS SW RAID default setting

1Select Objects from Management menu.

2Select Adapter from Objects. The selectable adapter will be listed.

3Press Enter on the adapter and the adapter setting will be shown

on the screen. You can change the setting from this menu.

4Select Factory Default and Yes to load the default settings.

5 Exit the configuration utility and press Ctrl+Alt+Del to reboot the

server.

Create RAID 1 volume

1Select Configuration from Management Menu.

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 183 184

Keine Kommentare

Acer Network Device Altos R520 Bedienungsanleitung Seite 177