Acer Network Device Altos R520 Bedienungsanleitung PDF herunterladen (Seite 178)

Appendix B: RAID configuration

168

2Select New Configuration from the Configuration menu and

select Yes to continue. An array selection menu displays the

devices connected to the current controller.

3 Press the arrow keys to choose specific physical drives and press

spacebar to associate the selected drive with the current array. The

indicator for selected drive change from READY to ONLINE

4 Add 2 drives to current array and press Enter to finish creating

current array.

5 Press Enter again to select array to configure.

6 Press spacebar to select the array and press F10 to configure the

logical drive

7 The default RAID level for 2 disk drives is RAID1. Select Accept to

use the default setting and press Enter to return to the ARRAY

SELECTION MENU.

8 Press Enter to end the array configuration.

9Select Yes to Save Configuration and press any key to return to

the Configure menu.

Initial RAID Volume

1 Press Esc to return to the Management Menu.

2Select Initialize from Management menu. All logical drives should

be listed under Logical Drives.

3 Press spacebar to select drives for initialization. The selected drive

will be shown in yellow.

4 After selecting the drives, press F10 and select Yes to start the

initialization process.

5 When initialization is complete, press any key to continue.

6 Press Esc to return to the Management Menu.

Save and Exit Embedded RAID II Configuration Utility

1 When RAID configuration and initialization is complete, press Esc

in the Management Menu

2Select Yes to exit the Embedded RAID Configuration Utility.

3 Press Ctrl+Alt+Del to reboot the server.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 184

Keine Kommentare

Acer Network Device Altos R520 Bedienungsanleitung Seite 178