Acer Network Device Altos R520 Bedienungsanleitung PDF herunterladen (Seite 179)

169

Configuring the onboard SATA RAID

This section briefly shows how to create RAID 1 (mirror) volume with

onboard SATA RAID function.

Load BIOS default setting

1 Power on the server to start the system POST (Power On Self Test)

process. During boot up, press F2 to enter the BIOS setup screen.

2Press F9 to load BIOS default setting and press <F10> save the

configuration changes and exit setup.

Enable onboard SATA RAID function

1 In the BIOS Setup Utility, move cursor to Advanced. Then select

ATA Controller and press Enter.

2 Move cursor to Configure SATA as RAID and press Enter to

change the options to Enabled.

3Press F10 save the configuration changes and exit setup.

Enter the onboard SATA RAID Configuration Utility

When you see the Intel Embedded Server RAID Technology II

information shows on the screen during the POST (Power-On Self Test),

press Ctrl+E to enter the Embedded RAID II Configuration Utility.

Loading onboard SATA RAID default setting

1Select Objects from Management menu.

2Select Adapter from Objects. The selectable adapter will be listed.

3Press Enter and the adapter setting will be shown on the screen.

You can change the setting from this menu.

4Select Factory Default and Yes to load the default settings.

5 Exit the configuration utility and press Ctrl+Alt+Del to reboot the

server.

Create RAID 1 volume

1Select Configuration from Management Menu.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184

Keine Kommentare

Acer Network Device Altos R520 Bedienungsanleitung Seite 179