Acer Network Device Altos R520 Bedienungsanleitung PDF herunterladen (Seite 89)

Removing and installing an ARMC/3

module

The optional ARMC/3 module provides server management firmware

and functionality to the system.

To remove an ARMC/3 module:

1 Observe the ESD precautions and pre-installation instructions

described on page 39.

2 Remove the CPU air duct. Perform the instructions described in “To

remove the CPU air duct” section on page 45.

3 Remove the NIC module.

a Pull up the module to remove it from the connector.

b Remove the three standoffs from the mainboard, then keep

the standoffs for later NIC module installation.

4 Hold the module both by the finger grip loop and by the opposite

corner (A).

Caution! Do not bend or twist the module.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 183 184

Keine Kommentare

Acer Network Device Altos R520 Bedienungsanleitung Seite 89