Acer PCI Disk Array Controller Drivers 08P4100 Bedienungsanleitung Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 100
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
Installing the Mylex Disk Array Controller as the Primary NetWare 4.2 Controller
2-4 PCI Disk Array Controller Drivers Manual
1. The appropriate drivers should be loaded before trying to access the
non-disk devices. For example, to use NetWare's Sbackup utility, do the
following:
: load mdac.ham
: load nwtape.cdm
: load tsa410
: load tapedai
: scan for new devices
: load sbackup
Except for the mdac.ham driver, .CDM or .NLM files are supplied by
Novell. Refer to the Novell documentation for instructions on running
Sbackup.
2. Load the following drivers to use a CD-ROM under NetWare 4.2 (the
NLMs aspicd and cdrom are supplied by Novell):
: load mdac.ham
: load scsicd.cdm
: load cdrom.nlm
: cd mount [volume name]
After the CD-ROM is mounted, the volume on the CD-ROM can be
mapped from any workstation and accessed.
Installing the Mylex Disk Array Controller into an Existing
NetWare 4.2 System
If NetWare 4.2 is already installed and you wish to add a Mylex Disk Array
Controller later, the controller will be a secondary (non-bootable) controller.
After installing the controller hardware and configuring a disk array, follow
the procedure below to add the necessary controller drivers.
1. With NetWare Server 4.2 loaded and running, load the NetWare
program INSTALL.NLM by typing the following at the console
prompt:
: load install
and press <Enter>.
2. Choose Driver Options in the Installation Options menu.
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare