Acer PCI to Ultra SCSI RAID Controllers DAC960PG Bedienungsanleitung PDF herunterladen (Seite 27)

Manual No. 775012 4-1

Chapter 4

Controller Start-up

This chapter describes:

• BIOS Options

• BIOS Configuration Utility (RAID EzAssist)

• Operating System, Device Drivers, GAM

• What to Check in Case of Problems

This chapter describes the DAC960PG and DAC960PJ controller start-up

procedures and messages produced by the BIOS during start-up or re-boot.

This chapter also explains three BIOS options that are available for

configuring controller operation.

BIOS Options Sequence

After physically installing the controller and connecting the cabling, do the

following if you need to set or modify the BIOS options (see “Setting BIOS

Options” on page 4-2 for details).

1. Power on the any drive enclosures connected to the controller.

2. Power on the computer.

3. Watch the messages on the screen for the following prompt to be

displayed:

Press <ALT-M> for BIOS options

4. Press Alt–M to get into the BIOS Options menu.

5. The BIOS Options menu provides the following items to choose from:

6. To select any of the items in the menu, highlight the selection with the

Up Arrow or Down Arrow. Press Enter to toggle any of the 3 items.

☛ Note

BIOS must be enabled to toggle the CD-ROM boot

and the Drive geometry parameters.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 85 86

Keine Kommentare

Acer PCI to Ultra SCSI RAID Controllers DAC960PG Bedienungsanleitung Seite 27