Acer PCI to Ultra SCSI RAID Controllers DAC960PG Bedienungsanleitung PDF herunterladen (Seite 28)

BIOS Options Sequence

4-2 DAC960PG and DAC960PJ Installation

Setting BIOS Options

The available BIOS options are:

• BIOS disabled/enabled

• CD-ROM boot disabled/disabled

• 2GB/8GB drive geometry

BIOS Disable or Enable

This option must be enabled in order to toggle the CDROM boot and the

drive geometry parameters shown in the BIOS Options menu. The BIOS

must also be enabled in order to boot from any device (e.g., CD-ROM) or

system drive configured on the controller, or to access any DOS partition on

any drive configured on the controller.

When BIOS Disable or Enable is selected, the following message will be

displayed. Pressing any key will restart the system.

CD-ROM Boot Disable or Enable

The default for this option is for the CD-ROM boot to be disabled (e.g., the

system will boot from a hard drive, even if there is a bootable CD installed).

If the CD-ROM boot option is enabled, and if a bootable CD is installed in

the CD-ROM drive, the system can boot from the CD.

If the CD-ROM boot option is enabled, the CD-ROM will take priority over

the disk drives. For example, under MS-DOS, the disk drive that is normally

Drive C will become Drive D. All subsequent drive IDs will similarly be

moved down.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 85 86

Keine Kommentare

Acer PCI to Ultra SCSI RAID Controllers DAC960PG Bedienungsanleitung Seite 28