Acer AR585 F1 Bedienungsanleitung PDF herunterladen (Seite 30)

Appendix A Server management tools

Creating a RAID Volume

1 Select Array Configuration Utility option.

2 Select Create Array.

The Select drives to create Array displayed.

3 Select desired hard drive disk and then press <Insert> to add it in

the Selected Drives area.

4 Press <Enter> to complete the selection.

5 Select Array Type.

6 Configure the array properties.

7 Press Done when finish.

8 Press <Y> when "Do you want to create an array? (Yes/No):"

displayed.

9 Press any key to continue.

10 Once the RAID volume is created, press <Esc> to exit.

Initialing a RAID Volume

During Adaptec onboard SATA RAID volume creation process, the

onboard SATA RAID volume will be automatically initiated once the

onboard SATA RAID volume has been created.

Assigning a Hot Spare Drive

A hot spare is a hard disk drive that automatically replaces any failed

drive in a RAID volume, and can subsequently be used to rebuild the

RAID volume.

1 Select Array Configuration Utility option.

2 Select Add/Delete Hotspare.

The Select drives to assign Spare displayed.

3 Select desired hard drive disk and then press <Insert> to add it in

the Assigned Hotspare drives area.

4 Press <Enter> to complete the selection.

5 Press <Y> when "Do you want to create a spare? (Yes/No):"

displayed.

6 Once a hot spare drive is created, press <Esc> to exit.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

Keine Kommentare

Acer AR585 F1 Bedienungsanleitung Seite 30