Acer Note Nuovo Bedienungsanleitung PDF herunterladen (Seite 131)

6-24 User’s Manual

6.6.3 Hard Disk Drive Control

This parameter allows you to enable or disable the read/write functions of the

hard disk. The following table summarizes the available options.

Table 6-3 Hard Disk Drive Control Settings

Setting Description

Normal (default) Hard disk functions normally

Write-Protect Disables any hard disk write function. This function protects all

sectors only under DOS mode.

Disabled Disables the hard disk

6.6.4 Start Up Sequences

This parameter determines which drive the system boots from when you turn

on the system. The following table lists the five possible settings.

Table 6-4 Start Up Sequences Settings

Setting Description

A: then C:

(default)

System boots from floppy drive A. If the diskette is a non-

system disk, the system boots from hard disk C.

C: then A: System boots from hard disk C. If the hard disk is a non-

system disk, the system boots from floppy drive A.

A: only System boots from floppy drive A. If the floppy drive is a non-

system disk, an error message appears.

C: only System boots from hard disk C. If the hard disk is a non-

system disk, an error message appears.

CD-ROM then

C: then A:

System boots from a CD-ROM disc if one is installed in the

CD-ROM drive. If no disc is present, the system boots from

the hard disk C. If the hard disk is a non-system disk, then the

system boots from floppy drive A.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 156 157

Keine Kommentare

Acer Note Nuovo Bedienungsanleitung Seite 131