Acer Aspire E380 Technical Information PDF herunterladen (Seite 48)

41 Chapter 2

PnP/PCI Feature

Parameter Description Options

Init Display First This item allows you to choose the primary

display card.

PCIEx

Reset Configuration Data If you enable this item and restart the system,

any Plug and Play configuration data stored in

the BIOS Setup is cleared from memory.

Enabled

Disabled

Resources Controlled By You should leave this item at the default

Auto(ESCD). Under this setting, the system

dynamically allocates resources to Plug and

Play devices as they are required. If you cannot

get a legacy ISA(Industry Standard

Architecture) expansion card to work properly,

you might be able to solve the problem by

changing this item to Manual, and then opening

up the IRQ Resources submenu.

Auto(ESCD)

IRQ Resources In the IRQ Resources submenu, if you assign

an IRQ to Legacy ISA, then that Interrupt

Request Line is reserved for a legacy ISA

expansion card. Press <ESC> to close the IRQ

Resources submenu. In the Memory Resources

submenu, use the first item Reserved Memory

Base to set the start address of the memory you

want to reserve for the ISA expansion card. Use

the section item Reserved Memory Length to

set the amount of reserved memory. Press

<ESC> to close Memory Resources submenu.

PCI/VGA Palette Snoop This item is designed to overcome problems

that can be caused by some non-standard VGA

cards. This board includes a built-in VGA

system that does not require palette snooping

so you must leave this item disabled.

Enabled

Disabled

Maximum Payload Size This item specifies the maximum payload size

for the PCI Express function.

4096

Phoenix-Award WorkstationBIOS CMOS Setup Utility

PnP/PCI Configurations

Init Display First [PCI Ex]

Reset Configuration Data [Disabled]

Resources Controlled By [Auto(ESCD)]

IRQ Resources Press Enter

PCI/VGA Palette Snoop [Disabled]

** PCI Express relative items**

Maximum Payload Size [4096]

Item Help

Menu Level

mnlk

F5:Previous Values F7:Optimized Defaults

: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 82 83

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer Aspire E380 Technical Information Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Acer Aspire E380