Acer Aspire SA85 Technical Information PDF herunterladen (Seite 56)

50 Chapter 2

Set Supervisor/User Password

When this function is selected, the following message appears at the center of the screen to assist you in

creating a password.

Type the password, up to eight characters, and press <Enter>. The password typed now will clear any

previously entered password from CMOS memory. You will be asked to confirm the password. Type the

password again and press <Enter>. You may also press <Esc> to abort the selection.

To disable password, just press <Enter> when you are prompted to enter password. A message will confirm

the password being disabled. Once the password is disabled, the system will boot and you can enter BIOS

Setup freely.

Supervisor Password has higher priority than User Password. You can use Supervisor Password when

booting the system or entering BIOS Setup to modify all settings. Also you can use User Password when

booting the system or entering BIOS Setup but can not modify any setting if Supervisor Password is enabled.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 87 88

Keine Kommentare

Acer Aspire SA85 Technical Information Seite 56