Acer AB460 F1 Bedienungsanleitung PDF herunterladen (Seite 118)

100

101

3 Server Blades: Setup and Installation

Installing DIMM Memory Modules

1. Power down the blade module (see "Powering Down a Blade

Unit" on page 92).

2. Remove the blade from the enclosure and the cover from the

blade (see "Removing/Replacing the Blade Cover" on page 93).

3. Insert each DIMM vertically into its slot, starting with slots 1A and

2A. Pay attention to the notch along the bottom of the module to

prevent inserting the DIMM incorrectly (see Figure 3-58).

Figure 3-58. Installing a DIMM into a Memory Slot

4. Gently press down on the DIMM until it snaps into place in the

slot. Repeat for all modules. Refer to the DIMM population rules

for each blade before installing.

5. Replace the air shroud and the blade cover and install the blade

module back into the enclosure.

6. Power up the blade unit (see "Powering Up a Blade Unit" on page

92).

Hard Disk Drive Installation

Hard disk drives are installed in “carriers” which are hot-swappable and can

be removed or replaced without powering down the blade unit they reside

in. A blade module needs a hard disk drive with an operating system

installed to operate.

To Install: Insert module

vertically and press down

until it snaps into place. Pay

attention to the bottom

notch.

To Remove: Use your thumbs

to gently push each release

tab outward to free the

DIMM from the slot.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 617 618

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer AB460 F1 Bedienungsanleitung Seite 118

Kommentare zu diesen Handbüchern