Acer AB460 F1 Bedienungsanleitung PDF herunterladen (Seite 125)

100

101

105

Configuring the IP/MAC Addresses

Note: The DHCP (Dynamic Host Configuration Protocol) is

on by default. To change the manufacturer default setting,

please use the Acer Smart Blade Manager or the BIOS

firmware.

Using the BIOS Settings to set the IP/MAC Addresses

1 Go to the BIOS by pressing the <Del> key during system boot.

2 Select IPMI from the Advanced Menu.

3 Select LAN Configuration from the IPMI submenu.

4 Click on the item - IP Address Source. Select the option Static and

hit <Enter>. The onboard BIOS will automatically set the IP

Address, MAC Address, Acer, and Subnet Mask.

5 Once the IP, MAC Addresses, Acer and Subnet Mask are set, click

on the item Update LAN Settings. Select Yes and hit <Enter> to

update IPMI LAN settings.

6 Go to the Exit menu. Select Save Changes & Exit and hit <Enter> to

save changes and exit the BIOS.

Using the Internet Browser

1 Connect a LAN cable to the Ethernet port of the CMM module.

2 Choose a computer that is connected to the same network and

open the browser.

3 Enter the IP address of each server that you want to connect to in

the address bar in your browser.

4 Once the connection is made, the Log-In screen as shown on the

next page will display.

Using IE* to Access the BMC/IPMI Settings from Your

Computer

To Log In

Once you are connected to the remote server, the following screen will

display.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 617 618

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer AB460 F1 Bedienungsanleitung Seite 125

Kommentare zu diesen Handbüchern