153
CMOS Clear
JBT1 is used to clear CMOS and will also clear any passwords. JBT1
consists of two contact pads located near the BIOS chip (#12 in
Figure 3-104).
Clearing CMOS
1. First power down the blade and remove it from the enclosure.
2. Remove the blade cover to access the mainboard (see "Removing/
Replacing the Blade Cover" on page 18 for further details). Short
the CMOS pads with a metal object such as a small screwdriver.
3. Replace the cover, install the blade back into the enclosure and
power it on.
Item Description
1 LGA 1366 CPU Sockets
2 DIMM Slots
3 6 SAS2/SATA Hard Drive Bays
4 InfiniBand Connectors (for InfiniBand cards)
5 Gbx Connectors (for power and logic to backplane)
6ICH10
7 Intel 5500 chip
8 Onboard Battery
9 Front IO Module
10 BIOS Chip
11 LSI 2008 SAS2 Controller
12 JPT1 (CMOS clear)
Kommentare zu diesen Handbüchern