Acer AB460 F1 Bedienungsanleitung PDF herunterladen (Seite 36)

100

101

2 Chassis Enclosure

5. (Optional step) Add the front left and right handles to the

enclosure using five screws to secure each handle. Install a

thumbscrew through the bottom hole of each handle (see

Figure 2-7).

Note: These handles are optional and need only be installed when

mounting the system into a short rack. When mounting into a

deep rack, they are unnecessary and regular screws should be used

instead of thumbscrews.

Be aware that these handles are not to be used for lifting the system, they are

only to be used to slide the system within the rack.

6. With one person on either side (see the descriptive label on the

side of the enclosure), lift the enclosure and slide it into the

installed rails.

Warning! Be sure that the enclosure is empty of all blades, power sup-

plies, switches and management modules BEFORE lifting. These should

be installed AFTER the enclosure is mounted in the rack. Injury and dam-

age may occur if components are not removed from the rack prior to in-

stallation.

7. After pushing the enclosure all the way into the rack, use two

roundhead screws on each side of the server to lock it into place.

Figure 2-7. Attaching the Optional Handles

8. The enclosure is now securely installed in the rack (see Figure 2-8).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 617 618

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer AB460 F1 Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern