543
Use the "H" option to set hardware information by typing the character
H. This will display the hardware information that can be changed as
shown in.
4. To choose the boot from a fallback image, type the command:
rflag=1
5. Type
Save
to save the hardware information.
6. Type
Exit
to exit the hardware information menu.
7. Type J to boot the image. In this case it will boot from a fallback
image.
8. In case you wish to later move back to a normal image, repeat the
above the steps with one difference for step 4, where you should
use the command rflag=0
instead
of rflag=1 to boot with a
normal firmware image.
Kommentare zu diesen Handbüchern