Acer AB460 F1 Bedienungsanleitung PDF herunterladen (Seite 578)

100

101

5 Acer Smart Blade Manager

558

ID: Shows the status of the ID LED. Check Enable to enable the ID. Once

enabled, the ID LED on the blade panel will flash.

System Fault: Indicates the system fault status.

BMC: Shows BMC status. If a BMC module is installed, the BMC IP

address will appear here. Use Update to update the BMC IP. Click to

reload the BMC IP. If BMC is not installed

not installed

appears and the

buttons are disabled.

Watt: The estimated power consumption (wattage) of the blade. It is a

static value supplied by BIOS.

Power Control

Power On: Click to power on the blade.

Reset: Click to reset the blade.

Graceful Shutdown: Click to perform a graceful shutdown on the

blade.

Power Down: Click to power down the blade.

Sensors

This section displays the motherboard identifier for easy reference. The

sensor table shows the CPU(s), system temperature and voltages of the

selected blade system.

The table headers indicate the status, sensor name, reading and the

low and high limits. If the status of a sensor is normal, the reading will

be in blue and the sensor will have an OK symbol. If a sensor status is

out of range, the reading will be red and the sensor will have a fail

symbol. If the sensor is not present the reading will be N/A.

1 2 ... 573 574 575 576 577 578 579 580 581 582 583 ... 617 618

Kommentare zu diesen Handbüchern

Keine Kommentare

Acer AB460 F1 Bedienungsanleitung Seite 578

Kommentare zu diesen Handbüchern