Acer ALH-316ds/324ds Betriebsanweisung PDF herunterladen (Seite 11)

This chapter describes the network topology for hybrid 10 Mbps and 100

Mbps networks, cabling requirement for connections, the interoperability

between hubs and switches.

3.1 Connecting a hub/switch to normal port

You can use the ALH-316ds/324ds as a terminal connecting equipments

in corporate LAN environment, and for the purpose of expanding your port

number you can connect another hub/switch with it’s uplink port to the

normal port of ALH-316ds/324ds. See Figure 3-1

1. Place the hub/switch on a stable surface.

2.Use one end of the UTP/STP cord to connect to the uplink port of the

hub/switch.

3. Use the other end of the UTP/STP cord to connect to the normal port of

ALH-316ds/324ds

4.Check the status of Link LED. If the Link LED is lit on green then it works

normal.

5.Then you can connect the terminal to the new hub/switch

Figure 3-1 Connecting to normal port with other hub/switch

3. Hardware Description

H U B

update ALH-316_324UM.qxd 11/10/99 8:42 AM ›¶›– 8

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Keine Kommentare

Acer ALH-316ds/324ds Betriebsanweisung Seite 11