Acer ALH-316ds/324ds Betriebsanweisung PDF herunterladen (Seite 6)

2.1 Connecting power cord

Carefully unpack the ALH-316ds/324ds and it’s accessories. For the first

time that you use this hub, please make sure there is all the same as the

checking list in the package. The procedure for connecting to the power

will be:

1.Place the hub on the desktop or one a rack stably and verify the

power cord is a correct one suitable for your national standard plugs.

2.Connect the power cord to the hub first

3.Plug the power cord into the outlet on the wall, turn on the power,

and check if the power LED lights up. If it lights up, then the hub is

ready to be connected to the network. See Figure 2-3.

Figure 2-3 Connecting to the power

2.2 Connecting to computers

Make sure the hub is ready for networking by checking if the PWR

indicator displays.

1.Shut down the computer and install an adapter card in.

2.Plug in the one end of UTP/STP cable to the RJ-45 phone jack of the

network adapter.

3.Plug the other end of UTP/STP to normal ports of the ALH-

316d/ALH-324ds.

4.Turn on the PC and check if the Link LEDs on the adapter card and

the hub (Named as Link/REC) are lit up. See Figure 2-4

update ALH-316_324UM.qxd 11/10/99 8:42 AM ›¶›– 3

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Keine Kommentare

Acer ALH-316ds/324ds Betriebsanweisung Seite 6