Acer Aspire 6400 Bedienungshandbuch PDF herunterladen (Seite 20)

Display Panel



Removing the Display Panel



1. Follow the instructions in Before Working Inside Your Computer.



2. Remove the display assembly (see Removing the Display Assembly).



3. Remove the display bezel (see Removing the Display Bezel).



4. Remove the eight M2 x 3-mm screws (four on each side of the display panel).



5. Lift the display panel out of the display back cover.



6. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.



7. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: To help prevent damage to the system board, you must remove the main battery (see Before Working Inside Your Computer) before you

begin working inside the computer.

display panel

M2 x 3-mm screws (8)

display back cover

grounding wire and captive screw



pull-tab on bottom flex-cable

connector

top flex-cable

connector

display cable

connector

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

Keine Kommentare

Acer Aspire 6400 Bedienungshandbuch Seite 20