12
Altos R380 F3 Installation Configuration Guide
Intel Onboard SATA RSTe RAID
Below information describes how to manually install
Windows Server 2012 on Altos R380 F3 with Intel Onboard
SATA RSTe RAID.
BIOS Required
Altos R380 F3 BIOS 01.01.0008 (or later) can support
Windows Server 2012.
Drivers Required
Intel Onboard
SATA RSTe RAID
Management
Engine
Interface
Software Required
Intel Onboard
SATA RSTe RAID
Utility
Configuring Intel Onboard SATA RSTe RAID
Please refer to Appendix A. for Intel Onboard SATA RSTe
RAID configuration.
Installation Tips
NOTE. Please refer to Altos R380 F3 FAQ (Frequently Asked
Questions) to select OS installation in EFI mode or Legacy
mode if the OS media supports EFI.
NOTE. Windows Server 2012 cannot detect Intel Onboard SATA
RSTe RAID. Please load the RAID driver during OS
installation.
NOTE. You need an external USB floppy drive or USB Flash
drive to load RAID driver during the OS installation.
Kommentare zu diesen Handbüchern