Acer Altos R380 F3 Bedienungsanleitung Seite 54

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 58
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 53
47
Altos R380 F3 Installation Configuration Guide
Set RAID Controller in EFI Mode or Legacy Mode
1. Please press F2 to enter BIOS Setup during POST.
2. Please press F9 to load default BIOS settings.
3. In Main Page, change Quiet Boot from Enabled to Disabled.
Quiet Boot [Disabled]
4. In Boot Maintenance Manger Page, select Advanced Boot Options
5. You would see below information.
Boot Mode [Legacy]
6. To enable EFI mode, please change the setting from Legacy to UEFI.
Boot Mode [UEFI]
7. To enable legacy mode, please change the setting to Legacy.
Boot Mode [Legacy]
8. Save the setting and exit from BIOS Setup.
Legacy Mode
Entering RAID BIOS Utility (Legacy Mode)
Please press CTRL-R when you see the RAID BIOS during POST.
After POST finished, the Intel Integrated RAID Module BIOS
Configuration Utility will show on the screen.
Loading Factory Default Setting (Legacy Mode)
1. In the top menu, please press Ctrl-N to switch to Ctrl Mgmt page.
2. Press Tab to move the cursor to Set Factory Defaults and then press Enter.
3. Select OK to load factory defaults.
4. Press Ctrl-S to save the change.
5. Press Esc and then select OK to exit.
6. Press Ctrl + Alt + Del to reboot the server.
Creating a RAID Volume (Legacy Mode)
1. On the VD Mgmt page of top menu, please move cursor to the root of Intel
Integrated RAID.
2. Press F2 and select Create Virtual Drive.
3. Select the RAID Level desired by Enter.
4. Select Drives for the virtual drive.
APPENDIX C: INTEL
INTEGRATED RAID MODULE
Seitenansicht 53
1 2 ... 49 50 51 52 53 54 55 56 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare