Acer Altos R380 F3 Bedienungsanleitung PDF herunterladen (Seite 55)

Altos R380 F3 Installation Configuration Guide

5. Specify the size.

6. Select OK.

7. Select OK to create the virtual drive.

Initializing a RAID Volume (Legacy Mode)

1. Locate the cursor on Virtual Drive 0 you just created and then press F2.

2. Select Initialization > Fast Init.

3. Select Yes.

4. Press OK when initialization is complete.

Assigning a Hot Spare Drive (Legacy Mode)

1. In the top menu, please press Ctrl-N to switch to PD Mgmt page.

2. Select the drive desired for the hot spare drive.

3. Press F2 and then select Make Global HS.

4. Press OK.

5. Press Esc.

6. Select OK to exit.

7. Press Ctrl + Alt + Del to reboot the system.

8. Now you can start to install the operating system.

EFI Mode

Entering RAID EFI Utility (EFI Mode)

Please press F2 to enter BIOS Setup during POST. In BIOS

Setup, select Advanced > PCI Configuration > UEFI Option

ROM Control > Intel RAID Controller to configure Intel

Integrated RAID in EFI mode.

Loading Factory Default Setting (EFI Mode)

1. Select Controller Management > Advanced Controller Management.

2. Select Set Factory Defaults.

3. Check Confirm and then select Yes.

4. Select OK and then press F10 to save the change.

Creating a RAID Volume (EFI Mode)

1. Select Configuration Management > Create Virtual Drive.

2. Select the RAID Level desired by Enter.

1 2 ... 50 51 52 53 54 55 56 57 58

Keine Kommentare

Acer Altos R380 F3 Bedienungsanleitung Seite 55