Just forstarters...
1.
3.
5.
4.
Drill four holes into a solid, structural ceiling member, and secure the
ceiling mount base to the ceiling.
2.
Choose the length combination based on actual environment.
(CM-01S doesn’t include Type 2 and Type 3.)
Connect the main body connector to the projector bracket (illustration 1),
and then screw up four screws (illustration 2).
Adjust the angle and positioning as necessary.
Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.
Type 2:
Type 3:
Type 1:
Illustration 1
Illustration 2
360°
Type 1:
For the standard size use three bracket screws to mount the projector to the
ceiling mount bracket.
Type 2 and Type 3:
Alternatively, for the larger size, use the sliding extensions for more supports.
Type 2
Type 3
Type 1
Kommentare zu diesen Handbüchern