Acer AL2032W Bedienungsanleitung PDF herunterladen (Seite 5)

Connecting the Devices

Caution: Make sure that the computer and the monitor are both disconnected from the

power supply.



AC/DC Adapter

With power cord

Connect the plug of the AC/DC adapter to the (DC IN ) socket of the

monitor , then be insert the power cord into the adapter and a properly

grounded electric socket.



VGA Cable Connect the signal cable to the VGA input socket (VGA IN) of the

monitor , and connect the signal cable to the VGA output socket of the

graphics card on the computer. Then tighten the thumbscrews on the

connector.



Audio Cable

Connect the audio input socket (AUDIO IN) of the LCD monitor and

the computer by means of the audio cable.

WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure

the shape of the plug matches the shape of the socket it is inserted into, and

that none of the pins are bent or otherwise damaged.

Switching the Power

First, switch the power on to the monitor, then switch the power on to the computer. When you

see the LED on the power button go blue, this indicates the computer is ready for use. Allow

about 10 seconds for the video signal to appear. If you do not see the blue light LED on the power

button or a video signal, check the connections.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Acer AL2032W Bedienungsanleitung Seite 5