Acer Film Scanner Bedienungsanleitung PDF herunterladen (Seite 19)

English

Chapter 3. Making Your First Scan

Refer to the following steps to make your first scan using the ScanWit film

scanner:

Step 1. Test the scanner

Turn on the power of your film scanner, then your computer. Wait until

the scanner completes its self-test. You can judge the status of the

film scanner from the LED indicators. Once the READY LED indicator

stops flashing, the film scanner is ready to scan.

Step 2. Place original on the holder

Place the film in the film holder. Two types of film holders are supplied

with your film scanner. You can select the appropriate film holder that

fits the type of your film:

Note: When you place the film/slide in the filmstrip/slide holder,

make sure that the film/slide is free from dust. You may also

want to check that the film/slide is cleaned properly.

If you want to scan a filmstrip:

You can use the filmstrip holder (the holder with 6 rectangular lattices

and a FILM mark) to place your filmstrip.

Filmstrip holder

Pull the handle on the cover to open the cover.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

Keine Kommentare

Acer Film Scanner Bedienungsanleitung Seite 19