Acer Film Scanner Bedienungsanleitung PDF herunterladen (Seite 67)

English

Chapter 6. Troubleshooting and FAQ

6.1 Troubleshooting

6.1.1 Why does the driver sometimes show the message “SCSI card

not found”, and a few minutes later, it works properly?

To prevent damaging the scanner due to unstable power supply or short

condition, the fuse on the SCSI card could be open for a while. During this

period, the SCSI card does not function but after a few minutes, the fuse

temperature cools down and the fuse recovers. You can solve this question

by turning the scanner power off and turn it back on for a few minutes.

6.1.2 The scanner can not work and the screen shows “Scanner not

found” instead.

Make sure that the SCSI cable is connected properly to your PC and your

scanner is turned on. Otherwise, turn on the scanner, then enter Windows

Control Panel and click Refresh in Device Manager tab of System.

6.1.3 SCSI Connection Guideline

ScanWit film scanner uses a SCSI interface to connect to your computer

and other SCSI devices. Depending upon the configuration you use, there

will be certain guidelines to follow in order to ensure the proper function of

your ScanWit film scanner and other devices:

Single Device Configuration (you connect the ScanWit film scanner directly

to your computer, and there are no other SCSI devices inside your

computer or connected to the ScanWit film scanner):

In this case, you need to connect a SCSI terminator to the SCSI OUT

connector on your ScanWit film scanner.

Multiple Device Configuration (in addition to the ScanWit film scanner,

there are other SCSI devices on the SCSI chain):

A SCSI chain allows up to 7 SCSI devices to be connected, and each SCSI

device must have a unique SCSI ID number to avoid conflict between each

other. The last device on the SCSI chain must be terminated.

In this case, make sure that each device on the SCSI chain uses a different

SCSI ID number (refer to the documents that come with that device for

details on how to check the SCSI ID number of other SCSI devices) to

ensure the proper function of your ScanWit film scanner and other SCSI

devices.

1 2 ... 62 63 64 65 66 67 68 69 70

Keine Kommentare

Acer Film Scanner Bedienungsanleitung Seite 67