Acer Altos G330 MK2 Bedienungsanleitung PDF herunterladen (Seite 105)

Initial troubleshooting checklist

Use the checklist below to eliminate the possible cause for the problem

you’re encountering.

• AC power is available at the wall outlet?

• Is the power supply module properly installed?

• Is the system power cord properly plugged into the power supply

module socket? and connected to a NEMA 5-15R outlet for

100-120 V or a NEMA 6-15R outlet for 200-240 V?

• Are all peripheral cables correctly connected and secured?

• Did you press the power button to turn the server on (power

indicator should be lit green)?

• Are all device drivers properly installed?

• Is the hard disk drive properly formatted and configured?

• Are the BIOS configuration settings correct?

• Is the operating system properly loaded?

Refer to the operating system documentation.

• Are all hardware components compliant with the tested

components lists?

• Are all internal cables correctly connected and secured?

• Is the processor fully seated in its mainboard socket?

• Are all standoffs in the proper location and not touching any

components, causing a potential short?

• Are all add-in expansion cards fully seated in their slots?

• Are all system jumpers correctly set?

• Are all switch settings on add-in boards and peripheral devices

correct?

To check these settings, refer to the manufacturer’s

documentation that comes with them. If applicable, ensure that

there are no conflicts (e.g., two add-in boards sharing the same

interrupt).

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 124 125

Keine Kommentare

Acer Altos G330 MK2 Bedienungsanleitung Seite 105