Acer Altos G330 MK2 Bedienungsanleitung PDF herunterladen (Seite 49)

Opening the server

Caution: Before you proceed, make sure that you have turned

off the system and all peripherals connected to it. Read the

"Pre-installation instructions" section page 30.

You need to open the server before you can install upgrade

components. The front bezels and (left) side panel are removable to

allow access to the server’s internal components. Refer to the

following sections for instructions.

Removing the side panel

1 Perform the pre-installation instructions described on page 30.

2 Open the HDD bay bezel.

(1) If necessary, insert the key into the lock and turn it

counterclockwise until it points to the unlock icon.

(2) Open the lower bezel to a 90° angle.

3 Remove the side panel.

(1) Loosen the two screws located on the rear edge of the

side panel.

(2) Move the side panel release latch all the way down to

unfasten the panel from the chassis.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 124 125

Keine Kommentare

Acer Altos G330 MK2 Bedienungsanleitung Seite 49